Kiln operation under negative pressure level. Simplified and the fixing of the rotary connection means between the components, such as the kiln hood, between the kiln and the kiln hood,

there is a gap, in order to prevent outside air is sigh kiln into the kiln and preventing outside air alone band material vent, there must be sealed devices. In the production process, for

sealing the inspection work is also a very important, if problems should arise Mifengbuyan need for timely treatment, for different sealing methods standard to be achieved if the repair is

not the same, the following look at these three kinds of seals equipment repair criteria: a, friction piece 1. Up and down the sleeve should be flexible sealing activities, asbestos rope in

close contact with the active sleeve; 2. Activities sleeve in the bracket should be flexible enough to allow uniform contact friction plates twice; 3. Hammer properly adjusted, so that the

activities can sleeve kiln ran up and down with force when appropriate. Second, a labyrinth. Seal installation location accurate size, ran up and down in a rotary kiln, turn the ring not in

contact with the fixed ring. 2, the ring radial runout should not exceed 20 mm, axial runout should not exceed 10 mm. Third, the radial contact one. Blankets, rubber band, spring steel

sheet intact. 2. Fasteners complete, tighten the fit is not loose. 3 seals in good contact with the kiln. Professional production of rotary kiln, Henan YuFeng Heavy Equipment: The main

products are: lime kiln, rotary kiln, ceramic sand | sand rotary kiln, rotary kiln calcium aluminate powder, laterite nickel ore rotary kiln, rotary kiln magnesium, zinc oxide rotary kiln, rotary

kiln bauxite, petroleum proppant rotary kiln, rotary kiln, disc granulator, wind swept coal mill, ball mill, preheater, burners, coolers, etc.. Welcome new and old customers to our company

to negotiate! Please indicate Henan YuFeng Heavy Machinery