Kiln normal operation, to strengthen contacts and cooperation before, so after taking into account, for each change in a kiln operating parameters, must notify notify calciner. Calciner kiln parameters according to the changes in operating parameters can also be changed accordingly in order to ensure the balance and stability of the entire system. Operation, kiln kiln temperature and material according to the changes, combined with a variety of thermal instrumentation and intermediate test results indicate data, analysis and judgment kiln and precalciner system is functioning properly. Kiln operation to be stable in the absence of the kiln and precalciner system to find out the situation within the past can not be blind to change operating parameters. But does not allow kiln speed fluctuations, increased feed volume reduction. When changing the operating parameters, first from the wind, oil adjustment, adjust the air, oil can not be effective in the case before changing the kiln speed and volume of feed in the kiln speed and quantity changes, they must make Both adapt, ie a certain quantity to have a certain kiln speed, fast forward to ensure thin material, kiln loading rate remained at 6-7%, and in order to avoid the material layer is too thick, heat exchange is not good, and cause long slow kiln conditions in normal operation, pay great attention to the protection of the kiln skin, forcing the fire does not burn, once the kiln skin damage by moving the flame to adjust the flame, changing shadow position, the winds of change oil, change the kiln heat load and other measures to promptly fill the kiln skin hanging. The above article by Henan YuFeng Heavy Machinery finishing release, reproduced, please indicate the source!