To make rotary sealing device works well, we must first ensure that the installation place seal ends of cylinder diameter and bending deformation, does not exceed

the allowable range, or cause increased wear and damage parts, sealing device directly affect the effectiveness . Production, maintenance and repair should pay

attention to in order to ensure sealing device is always in good working condition, then we must pay strict attention to the following points. 1, check the windshield

ring kiln kiln parts, with or without severe wear or damage, whether there is a serious leakage phenomenon, connecting screws loose off. 2, check whether the contact

with rolling friction ring seal, seal sleeve friction surface without grease. 3, check the tension and suspension devices pulleys, rollers, ropes, springs, boom, hammer

and stents are flexible and effective, strong and safe. 4, kiln smoke chamber overhaul period is generally six months to clear the blast doors, Manhole, ash bucket,

put lime kilns scraper gates and the accumulation of material on the device and check whether opening and closing flexible seal. The above article by Henan YuFeng

Heavy Machinery finishing release, reproduced, please indicate the source!