For the operation of the rotary kiln, kiln low to tour regularly checked, be aware that when discovered irregularities, the time to deal with the low, so that failure to

eliminate in the bud, so as to avoid premature failure of components or other incidents occur in order to ensure the long-term safe operation of the kiln. Here are

some of the drive gear and bearing inspection and maintenance. A gear tooth contact width does not exceed 70% of width, with or without gnawing teeth at the end

or tip clearance is too large phenomenon. 2, with oil or with oil roller gear rotation is flexible enough gear oil viscosity is appropriate, there is no unusual

phenomenon of smoke. 3, the spring steel gear without flashing and abnormal sound, screw rivets and links (including the large gear itself connector screws) loose

during operation without shock and vibration. 4, the pinion shaft during operation without channeling and other irregularities. 5, depending on drive bearing open

manhole cover, observe the oil to bring the oil is clean spoon sufficient oil eye is smooth, scraping the oil seal plate and the effectiveness of oil leakage and abnormal

sound. 6, the drive bearing anchor bolts or screws loose links, whether or oscillating vibration phenomena. Professional production of rotary kiln, Henan YuFeng

Heavy Equipment: The main products are: lime kiln, rotary kiln, ceramic sand | sand rotary kiln, rotary kiln calcium aluminate powder, laterite nickel ore rotary kiln,

rotary kiln magnesium, zinc oxide rotary kiln, rotary kiln bauxite, petroleum proppant rotary kiln, rotary kiln, disc granulator, wind swept coal mill, ball mill, preheater,

burners, coolers, etc .. Welcome new and old customers to our company to negotiate! reproduced please specify Henan YuFeng Heavy Machinery