Kiln Network: pipes and precipitator dust in high-speed flow with the flow, no doubt dust particles on the pipe wall and the wall will have a strong rushing friction effect, resulting in wear and tear on dust removal equipment. The so-called wear dust usually refers to dust removal equipment and materials for the wear. The wear resistance and dust particles is directly related to their hardness. Generally, as the dust particles to increase the hardness, the wear resistance also increases. In addition, wear and dust particles of the shape, surface roughness, and the dust concentration and other factors. The rough surface of the irregularly shaped particles than the smooth surface of the spherical particles greater wear resistance. Dust concentration, the friction on the wall erosion more chance, so the wear and tear it big. Dust density in the same dust stream, the greater the flow rate of wear on the wall it gets. Abrasion resistance generally considered dust and air flow rate is proportional to power 2-3. That is, with the high-speed air flow of low flow of dust particles will Light Expanded Clay Aggregate (LECA)be much greater wear resistance. The wall of the cyclone dust removal equipment than other walls are more easily worn reason why. Learn dust abrasion resistance, the selection of dust removal equipment, pipelines and precipitator dust selected airflow velocity, to determine the thickness of the wall unit, as well as some parts susceptible to wear and tear (such as elbows, or cyclone, etc.) to increase the inner wall resistant lining (such as wear-resistant coating, cast stone, cast iron, etc.), to ensure the normal operation of dedusting system plays a significant role. Please indicate Henan YuFeng Heavy Machinery