Very extensive use of titanium dioxide, but must go through further processing in order to maximize its use, titanium dioxide is mainly used in coatings, plastics, inks, paper, paint which accounted for 60%, 20% plastic, paper accounted for 14%, other ( including cosmetics, chemical, electronics, ceramics, enamels, welding rod, alloy, glass and other fields) accounted for 6%. Henan YuFeng Heavy titanium structure is similar to alumina calcination kiln kiln, lime kiln and other industries in the kiln, its barrel roll made from sheet, refractory lining inside inlay puzzle, forming a predetermined angle to the horizontal. There are three sets of cylinder on wheels with a rectangle in all supported file support means. In the vicinity of the intermediate wheel on the cylinder with the spring plate cut with a ring gear fixed to its lower gear 300 meshing with a small. Coal GasifierTitanium rotary kiln normal operation, the main drive motor through the main gear reducer to the open power transmission, drive rotary kiln. Titanium rotary kiln main working principle is: the titania after filtration cake hydrolyzate with a certain slope and slowly entered the titanium rotary kiln body end (cylinder end), while kiln direction (cylinder low-end) of the mixing chamber will clean burning flame and hot air blown into the kiln to be dehydrated on the cake, calcining. The dehydration temperature above 1000 ℃, the hydrolysis of titanium dioxide calcined cake with titanium rotary body tilt, roll it along the circumferential direction both axially (from high to low) moves continuously to complete dehydration and calcination process . Ultimately through the lower part of the kiln hood Dual hydraulic discharge flap valve into the cooler, cooling, screening material after the finished product is titanium dioxide. The above article by Henan YuFeng Heavy Machinery finishing release, reproduced, please indicate the source!