AAC Production Line device is a new energy saving wall materials production equipment, to ensure the normal

operation of the product quality and production processes for the promotion of the development and promotion of

autoclaved aerated concrete block equipment has a great help. Aerated concrete according to the raw materials

category, quality, technical characteristics of major equipment, etc., to take a different process for production. However,

under normal circumstances, the fly ash or silica sand water into a slurry, adding the powdered lime, the amount of

cement, gypsum and a foaming agent, after mixing into the mold box, the static foaming and curing of oxygen, cut into

various Specifications block or plate, keep a car from the steam into the autoclave under high temperature saturated

steam curing that the formation of porous lightweight aerated concrete products. The tool / materials ash sand steps /

11 raw materials will be stored by measuring ingredients; 2 after pouring the ingredients injected into the mixer for

mixing into slurry; After the slurry was poured into the mold Stir; After a certain temperature and time Pre-raising until

the body reaches a certain hardness, you are ready to cut; flip spreader to mold in the air for 90 Flip spreaders

stripping device, so that the mold and body separated and the body together with the side panels together To cut a

small car lifting; cutting machine first vertical body sides of the cutting; then body longitudinal horizontal cutting; Finally,

the body horizontal vertical cutting; cutting together a good body of semi-finished spreader plates together steam crane

to raise a small car good for cutting body grouping, into the steaming cauldron to be raised; under certain temperature

and pressure steam curing steam-cured green body after finished the kettle from the spreader finished stacking the

finished product; packaging After loading