Rotary dryer technical features - Corporation News - crusher,ball mill,rotary dryer,aac plant,LECA line,flotation machine-YUFENG HEAVY MACHINERY

Rotary dryer technical features

Technical characteristics:

1 sterile plant installed in the tank, transmission components and bracket in a sterile room outside, through the wall separating the middle and use silicone ring seal on the wall, to ensure the normal operation of the sterile area and production.

(2) on the tank manhole cover with arc transition, to avoid dead ends and plot material, covered with rapping copper hammer, reaching anti-sticking, rapping shedding material effect.

3 using steam or hot water heating, the application of mechanical seal rotary joint to ensure leak-free operation.

4 using the gear drive to ensure smooth operation, using two variable speed, while using frequency soft start, so speed is adjustable.

5 Applied three or sintered metal mesh long, avoiding the traditional bag off and falling debris gland phenomenon, to ensure product quality, sintering Netease disassembly and cleaning.

6 double row angular contact ball bearings, so that the fixed point is conducive to the formation of the smooth operation of the device, avoiding the traditional spherical shaking; using a single point in favor of fixed equipment free thermal expansion.

7 double support tube using a single point, is conducive to the vacuum tube fixed to prevent the vacuum tube deformation.

8 has a cyclone, to prevent misoperation due to blowdown, to ensure the normal operation of the vacuum system.

9 Normal venting shall sterile room through vent pipe filter, but not in the tank vent on the location, you should vacuum trail, you can not use the outdoor air.

10 hot water tank installed on the bracket, heat pumps, on the one hand to play the role of counterweight on the other hand can save space.

11. The tank with live thermometer can be observed at any time and temperature controls.

12. The tank with vacuum feeding and discharge port, but also cater to the sampling port for easy feeding and sampling.

13 using two mechanical seals, a vacuum seal, a condensate water is sealed.

14 has a metal tube lane expansion joints, remove the device caused by thermal expansion deformation.

15 with quick opening manhole structure, easy operation, maintenance, cleaning, and disinfection.

Previous: Light Weight Block Machine knowledge quiz
Next: Magnetic separator, which has several?

Online Services

Leave A Message

　Details >>