We know that the temperature inside the kiln hot, can withstand 2000 degrees Celsius. Requires a large amount of consumption of high temperature in order to do the required processing temperature of the material, and once power cut or malfunction forced to stop operating, so that the temperature increase of the consumption, reducing productivity. This is something we should do to ensure that the temperature inside the kiln is not lost, reducing consumption. Now tell you what, Henan YuFeng Heavy rotary kiln temperature inside the insulation. 1, when the rotary kiln malfunction can not run, can not spray gas kiln insulation, when the kiln temperature drops below 800 degrees, the wind is gradually reduced or stopped, it is possible to open the lid of the kiln heat release. 2, other equipment downtime required rotary continuous operation, the wind volume control in the usual 1/4 degrees, and sprayed gas insulation, the insulation in the process, kiln thermocouple ≤ 800 degrees Celsius. 3, insulation process, kiln temperature 800 degrees C below the highest, kiln speed to a minimum, for natural insulation. 4, fault dealt with, kiln resume normal production, such as kiln temperature> 900 degrees Celsius, can be directly sprayed gas, coal to meet production conditions, such as low temperature kiln, can be open flame ignition, gradually warming up, restore production . 5, various insulation failure to stop the kiln and kiln operation, kiln, kiln sealing mechanism cooling fan non-stop. Please indicate Henan YuFeng Heavy Machinery (http://www.yufchina.com)