Rotary kiln due tilted occurs during operation under axial channeling is inevitable, if not out of control occurs kiln or kiln Xiakang major equipment accident. However, if you take certain measures, making rotary kiln operation does not occur when the traverse is possible. But to do so would result in roller and tire wear uneven surface, small gears on both sides soon Taiwan edges, resulting sometimes cause undue accidents. Skew roller adjustment method for controlling the shifting of rotary kiln is very effective, the operation is relatively simple, so applications are particularly extensive. However, due to management negligence, tend to roller adjustment disorder, causing kiln shell concentricity deviation is too large, the block discontinuity reasonable or uneven tire roller and cause excessive wear and tear, roller bearing bush-burning, roller and tire off the block, severe cleft segment, cylinder and roller load increases and so on. After the kiln body alignment, roller little deal, years of roller-watt seriously affect the production of high temperature problem has been solved. Therefore, noting that use of roller skew adjustment method should be noted that several issues is essential. The above article by Henan YuFeng Heavy Machinery (http://www.yufchina.com) finishing release, reproduced, please indicate the source!